WHAT IS NEW IN T3F?
IN ADDITION TO CENTIMETER LEVEL GNSS POSITIONING, T3F SUPPORTS HOT SWAP BATTERY, MULTIPLE I/O PORTS, OPTIONAL UHF RFID. IT JUST MAKE YOU WORRY FREE IN YOUR FIELD AND WORK EASY IN YOUR OFFICE.
The Nilamtec T3F is a rugged designed for Construction, Surveying, GIS, Environmental Management, Public and Utility Field applications. T3F can be used as a handheld with centimeter level GNSS positioning capability, and connected to professional external GNSS antenna to provide further high precision GNSS positioning function.
T3F is an AOSP Android tablet.
With built-in high precision multi-band GNSS receiver, T3F supports 184-channel concurrent multi-band reception of GPS, GLONASS, Galileo and BeiDou, and multi-band RTK with fast convergence times and reliable performance. T3F
can deliver centimeter level accuracy in seconds. With high update rate, T3F is capable to support highly dynamic applications in the field.
T3F also provide interface for professional GNSS antenna connection for high precision GNSS applications.
Reliability and Efficiency in The Field and Office
You can take T3F as a tablet to the field without worry about dust, water, damage caused by dropping the tablet, high or low temperature, and long operation hour.
- T3F provides IP67 rated protection from dust and water ingress
- The operating temperature of T3F is from -20°C to +60°C. T3F supports you in both cool winter and hot summer.
- Hot swappable 7000 mAh battery allow you keep working 7x24 non-stop.
- Integrated 13M pixel rear camera and 8M pixel front camera allow you take sharp photos for your information sharing.
- 8” LCD screen provides bright and easy to read display
- HDMI and USB ports are available which make your office work easy.
- UHF RFID is an optional feature for fast data capture.
Not Just a Rugged Tablet. T3F makes your work easy
It is a smart investment in T3F. T3F helps you to improve your field operation efficiency in GNSS positioning works, and integrate your surveying, data capture and e-work flow in a single device.
Integrated LTE cellar data, voice, and text capability
GNSS receiver type:
GPS L1C/A L2C, GLO L1OF L2OF,
GAL E1B/C E5b, BDS B1I B2I,
QZSS L1C/A L2C
Nav. update rate: RTK up to 20 Hz
Position accuracy: RTK 0.01 m + 1 ppm CEP
Convergence time: RTK < 10 sec
Protocols: NMEA, UBX binary, RTCM 3.3
GNSS Antenna Interface: SMA, 50 Ohms
13MP rear camera, 8MP front camera
High sensitivity GNSS receiver and antenna
WIFI IEEE802.11 a/b/g/n/ac, 2.4GHz and 5GHz
Capacitive multi-touch 8” LCD 1920 x 1200 Gorilla Glass Screen, 500cd/m² Brightness
Qualcomm SDM632 Octa core 1.8GHz Processor
4GB RAM, 64GB Flash Memory
Support Micro SD card
Dual SIM, Dual Standby
Support HDMI, USB-C, USB-A
Support UHF RFID (optional)